26
FUNCTIONAL INSTRUCTIONS
AMPLIFIER FEATURES AND OPERATIONAL CONTROLS
2
5
8
7
9
3
The
SUB IN
RCA jacks must be connected with the RCA output jacks of the head unit (Subwoofer Output).
The
WiFi-Box
connector is for the optional audio streaming module that allows to stream an audio signal to the amplifier, if it‘s
coupled with a smart phone via WiFi.
The
LINE IN
RCA jacks must be connected with the RCA output jacks of the head unit (2 x Stereo Output Front/Rear).
Connect the
AUX IN
(3,5 mm jack) with external audio sources like MP3 player, smartphones, navigation systems and like by
using suitable cables.
The
REMOTE CONTROLLER
port is for the enclosed remote controller. Please refer to the information on the next page.
The
OPTICAL
input is suited for a Toslink cable connection with an external audio source that provides a SPDIF signal (stereo
PCM).
If necessary, connect the mini-USB port by using the enclosed USB cable to the computer on which the
X-CONTROL
soft-
ware is installed. The connection can be released after using the DSP software.
Do not extend the cable in any way with a passive USB extension because otherwise a flawless communication between
the DSP amplifier and the PC can not be ensured. If you have to bridge longer distances, use an active USB extension with
integrated repeater.
The LED next to the USB port lights up blue when a connection between DSP device and computer is made via the USB cable.
POWER/PROTECT
If the
POWER LED
lights up, the amplifier is ready for operation.
If the
PROTECT LED
lights up, a malfunction is indicated. In this case refer to the chapter TROUBLE SHOOTING.
1
6
The
HIGH LEVEL INPUT
(included cable set with plug) can be used, if your head unit is not equipped with RCA pre-amplifier
outputs. You can connect then instead the loudspeaker outputs of your head unit with the high level input cable set accordingly
(refer to the assignment on the next page right above.
Note:
Please refer to the information
AUTO TURN ON
function on page 25, section #2.
Warning:
Never use the
HIGH LEVEL INPUT
function and the RCA inputs (#1 and #2) at the same time together. This may
damage the electronics of the processor.
4
4
5
6
7
8
9
+12V
GND
REM
POWER INPUT
LINE INPUT
LINE OUTPUT
AUX IN
POW.
PRT.
PC CONNECT
USB
FL
FR
RL
RR
SUB L
SUB R
FL
FR
RL
RR
SUB L
SUB R
H
+
–
+
–
G F E
WiFi BOX
OPTICAL INPUT
REMOTE
HIGH LEVEL INPUT
ONLY WITH HIGH LEVEL INPUT
AUTO TURN ON
OFF ON
BRIDGED
D
+
–
C
+
–
BRIDGED
B
+
–
A
+
–
LINE INPUT
AUX IN
PC CONNECT
USB
WiFi BOX
OPTICAL INPUT
REMOTE
HIGH LEVEL INPUT
ONLY WITH HIGH LEVEL INPUT
AUTO TURN ON
OFF ON
+12V
GND
REM
POWER INPUT
POW.
PRT.
LINE OUTPUT
H
G
BRIDGED
D
+
–
C
+
–
BRIDGED
B
+
–
A
+
–
BRIDGED
F
+
–
E
+
–
+12V
GND
REM
POWER INPUT
LINE INPUT
AUX IN
PC CONNECT
USB
WiFi BOX
OPTICAL INPUT
REMOTE
HIGH LEVEL INPUT
ONLY WITH HIGH LEVEL INPUT
AUTO TURN ON
OFF ON
POW.
PRT.
BRIDGED
D
+
–
C
+
–
BRIDGED
B
+
–
A
+
–
BRIDGED
F
+
–
E
+
–
BRIDGED
H
+
–
G
+
–
QE80.4 DSP
QE80.6 DSP
QE80.8 DSP
1
2
3
Summary of Contents for Quantum QE80.8DSP
Page 21: ...21 NOTITZEN ...
Page 41: ...41 NOTES ...
Page 42: ...42 NOTES ...
Page 43: ...43 NOTES ...