25
BASIC FUNCTIONS
Scroll down on the right to get to the crossover settings for the
subwoofer and a center speaker.
This is only useful if a subwoofer or center speaker is used.
Subwoofer (optional)
Under „Frequency“ you can set the cut-off value and only the
frequencies below this value will be played via the subwoo-
fer. This relieves the subwoofer and improves the sound. With
„Gain“ you can set the desired level of the subwoofer signal .
Under „Phase“ you can shift the phase of the signal to match
the bass with the vehicle‘s acoustic.
Center (optional)
Under „Frequency“ you can set the cut-off value and only
the frequencies above this value will be played via the center
speaker. This relieves the speakers and improves the sound.
With „Gain“ you can set the desired level of the center speaker
signal.
NOTE:
Tap on „Default“ to restore the respective factory preset.
REAR MEDIA
(optional)
If your vehicle is equipped with two headrest monitors in the
rear area and these are properly connected to the device, the
Dual Zone function allows an independent DVD, TV and AUX
playback additionally to the main screen of the device.
The rear monitors allow also an independently media playback
on each side under each other. Tap on the respective control
panel and select the desired application for the particular mo-
nitor. Operate the playback with the shown control buttons.
If you want to connect your headrest monitors to the audio outputs of the device, you must connect them
with the included „connection cable RCA/Cinch Audio Dual Zone“.