33
Test delay
Time from start loading to read the test value
Unloading
time
wait time for completing a single step test (Figure 3.14)
Trigger output and test process setting:
test page
→ press
MENU
→
system
setting
→ press
Enter
→ press the up and down keys to select the
output
item
Output mode
Level
Level trigger (low level valid )
Pulse
Pulse trigger
（
Pass 5mS,fail 10mS
）
Output conditions
Pass
Start trigger output (TRO) when the test passed
Fail
Start trigger output (TRO) when the test failed
End
Start trigger output (TRO) when the test ended
Disable
Disable trigger output
Fail action
Cont
Continue to complete all measurements when the single
step detection item is judged to be unqualified.
Abort
The auto test is terminated immediately when the single
step item is judged to be unqualified.
Figure 3.14 Test time
For example:
Object under test:
constant voltage source 24V, output current 0-5A, normal working
ET System electronic GmbH
