– 7 –
ETAsys.com
Specifications are subject to change without notice.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800-321-6699 • Fax: 800-996-3821
ETA-S20
AC Power Distribution Unit & Surge Suppressor
INSTALLATION
Before installing, we strongly suggest you read the entire manual to ensure you benefit from all the features of the ETA-S20. The
ETA-S20 can be placed on a shelf or rack mounted in a standard 19" width rack. When rack mounted, placement within the rack is
flexible however the ETA-S20 should be within 6' of a dedicated 20A AC outlet. When rack mounting, use Rack Rail type screws which
are
10
⁄
32
" x 1". Always make sure the 20A outlet is properly inspected by a certified electrician prior to connecting the ETA-S20. Make sure
to inspect the equipment that is to be plugged into the ETA-S20 to ensure it does not exceed 20A total amperage draw.
SPECIFICATIONS
Type
AC Power Distribution & Surge Suppressor
Front Panel
Outlets
20A NEMA 5-20R, 1 Unswitched
Activation Switch
Rocker, Illuminates Red when in the ON position
Circuit Breaker
20A Resettable
Indicators
AC Power ON Red, AC Protect Active ON Green
Rear Panel
AC Outlets
NEMA 5-20R, 8 Outlets total: 7 Switched, 1 Unswitched
AC Mains Power Cord
9' (2.74m), 12 gauge, AC Plug NEMA 5-20P
Technical Data
Current Rating
Limited to 16A 2000W Continuous
Current Protection
20A AC Mains Breaker
Operating Voltage
102VAC – 132VAC
MOV - New Generation
Qty. 3 Hot to Neutral, Hot to Ground, Neutral to Ground
Clamping Voltage
L-N: 400, L-G: 500, N-G: 400 / 3KA, 8/20µs
Max. Spike Clamping Voltage
6KV, 1.2/50µs
Max. Spike Clamping Resp. Time
<1 nanosecond
Maximum Surge Current
45000A, 8/20µs
Energy Rating
900 Joules, 8/20µs
Noise Attenuation EMI/FRI
40dB @ 10kHz - 100MHz
Temperature Range
5° – 35°C
Humidity Range
5% to 95% R.H.
Mechanical
Chassis Finish
Black
Mounting
Rack Mount, 1 RU
Height
1.75" (1RU, 44.5mm)
Width
19" (482.6mm)
Depth
3.75" (95.5mm)
Weight
5.5 lbs (2.49kg)
Power Consumption
800 milliwatts
Agency Listings
UL and cUL Listed
