The PD11SS is a sequential four step/stage power up/down conditioned power distribution unit. It is designed
to protect electronic equipment that requires a time-delayed start-up, particularly when high in-rush current
can potentially damage audio, video, or computer equipment at power up.
PD11SS Features:
• Microprocessor monitored sequential power distribution system
• Four power up/down steps or stages of distributed and conditioned power
• Four pre-set power up/down intervals of 1, 5, 10 or 30 seconds
• Optional manual settings for up to 240 seconds between intervals
• One dual 15 amp U-grounded outlet per stage
• One dual 15 amp "always on" U-grounded outlet
• Full 15 amps, 1800 watts capacity per unit
• 12-gauge, 3-prong, 6-foot, 15-amp power cord
• Protected "always on" 15 amp AC power outlet on the front panel
• Total unit 15 amp outlet circuit breakers located on front panel
• Three-stage spike and surge protection
• EMI/RFI filtration
• Watch dog circuitry with "Go/No Go" L.E.D. display
• One rack space high
• One year limited warranty
Other Features:
• Remote control operation
Access to remote feature is internal to three PC board mounted screw terminals for 3-wire hook-up.
Specifications:
Dimensions
19" L x 10" D x 1 3/4" H
Weight
10
lbs.
Quality
Finish
Black
powder
coated
chassis,
black
anodized
alumi
num
front
panel
Electrical
120V, 50/60 Hz, single phase
Max. amps
15/unit
Max. watts
1800/unit
Max. front outlet
15 amps
Spike/surge protection Line to neutral,
neutral to ground, line to ground
Clamping level
200V peak
Response time
1 nanosecond
Max. surge voltage
6000V
Max. surge current
12,000 amps
Max. spike energy
450 joules total
Noise attenuation
Transverse > 35 dB, 1.5 kHz to
200
MHz
Certification
ETL listed
Summary of Contents for PD11LP
Page 4: ......
