eta 0311, Instructions For Use Manual

17

GB

Hair drying

Move the switch 

A1

 either to position 

1

 (warm air) or to position 

2

 (hot air). The built-in 

ionizer starts to produce negative ions that eliminate creation of static electricity and help to 

keep your hair in excellent condition. Direct the outgoing air to hair while keeping the dryer 

handle in the distance of 10 to 15 cm from the head and move it evenly. In drying with hot 

air flow, take out excessive humidity from hair using a brush or fingers. If you have long 

hair, bend your head so that the hair falls down freely from the scalp and face.

IV. MAINTENANCE

Turn off the appliance before each maintenance, unplug the power cord from the power 

supply and let it cool down! Wipe the dryer surface with a wet soft cloth. Do not use rough 

and aggressive detergents! Maintenance only includes mechanical cleaning. Store the 

cooled down appliance at a safe and dry place, out of reach of children and incapacitated 

people.

Cleaning the grid (A4)

Grasp the grid and pull it out from the drier. Clean the grid from any dirt (e.g. with a brush). 

Replace the grid in an opposite direction after cleaning and click it back.

V. ENVIRONMENTAL PROTECTION  

Printed signs of materials used for manufacture, packing, components and accessories, 

as well as their recycling, are on all the pieces if their dimensions enable it. The symbols 

on the product or in the accompanying documentation mean that the used electric 

or electronic products must not be disposed together with municipal wastes. Please, 

hand them over to the collection points designed for their correct disposal, where they 

will be accepted free of charge. By correct disposal of this product you can help to 

preserve valuable natural resources and help to prevent possible negative impacts to the 

environment and to human health, which could be the results of incorrect waste disposal. 

For further details ask the municipal authorities or the nearest collecting point. Penalties 

can be charged for incorrect disposal of such wastes, according to national regulations. If 

the appliance is to be put out of operation definitely, we recommend cutting off the feeder 

cable, to disable its use. 

Expert service must do the large maintenance or to intervene into inside parts of the 

appliance!

Non-observance of the instructions of the manufacturer cancels the right for 

guarantee repair!

VI. TECHNICAL DATA

Voltage (V)  

given on type label

Absorbed power (W)  

given on type label

Weight (kg) approximately   

             0,35