EN - 53
EN
II. OVERVIEW
Freezer
Thermostat
and Light
Glass Shelves
Crisper Cover
Crisper
Baclonies
Leveling Feet
Note: Above picture is for reference only. Real appliance may be a little bit different.
III. REVERSE DOOR
Tool required:
Tool required:
philips screwdriver, flat bladed screwdriver, hexagonal spanner.
•
Ensure the unit is unplugged and empty.
•
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit
on something solid so that it will not slip during the door reversing process.
•
All parts removed must be saved to do the reinstallation of the door.
•
Do not lay the unit flat as this may damage the coolant system.
•
It’s better that 2 people handle the unit during assemly.
1. Remove two screws at rear side of top cover.
UNSCREW
