–
Ambient temperature is suitable for the application of the carbonator in the appliance.
If the carbonator is cooled down (e.g. due to transportation or storage), let it reach the
ambient temperature prior to installation.
–
The carbonator is only designed for CO
2
filling (food gas).
–
The carbonator may only be refilled by an authorized organization.
SAFETYADVICEFORTHEPETBOTTLE
–
Donotuseabottlethatisdeformed,crackedorscratchedorthathaschanged
colourorlosttransparencyortightn
ess.
If you find these facts, disp
ose of the bottle
ecologically and replace it with a new one.
–
Regularly check that the sealing in the cap of the bottle is not worn out or damaged.
–
Prevent contact of the bottle and the cap with aggressive cleaning agents (e.g.
alcohol,
diluentsorammoniac
) as they may cause damage (e.g.
deformation
).
–
Do not wash the bottle or the cap in the dishwasher (
unlesssuchacleaningmethodis
permittedbyasymbolonthebottle
).
–
Do not expose the bottle to temperatures below
1
o
C
and above
40
o
C
and protect it from
sources of heat (e.g.
stove,electric/gascooker,hotplate,grill
etc.) or direct sunlight.
–
Never place the bottle in the freezer as it may cause damage (e.g.
cracking
) to the bottle
and do not store the bottle in a car.
–
The bottle is not designed for heating liquids in a microwave oven.
–
Do not open the bottle by force and do not adjust the surface of the bottle in any way
(e.g.
usingself-adhesivefoil,stickers,paperorheatinsulation
).
–
If the bottle is exposed to some vibrations (e.g. during transportation), unscrew the cap
slowly. It eliminates excessive gas and prevents spraying of the drink when opening the
bottle.
– Never point the PET bottle neck at a face or other parts of your or other person’s body.
–
The bottle is only designed for cold or warm filling (
max.40°C
) of pure drinking water
and syrup. The water level must be of guideline.
.
–
Rinse (
atleastfivetimes
) the bottle and the cap well prior to the first use, e.g. in hot
water with soap or disinfectant, subsequently rinse with clean water and air dry.
–
Always prepare fresh water or store water in the refrigerator.
–
The water must not exceed the maximum filling level of
guideline when filling the bottle.
–
Always carbonate the water with carbon dioxide first and then add a syrup, ice or
crushed ice of your choice. Otherwise, the bottle may overflow.
II. DESCRIPTION OF THE APPLIANCE AND ACCESSORIES (Fig. 1)
A–SodaMaker
A1 – Button for CO
2
batch
A5 – Drainage outlets
A2 – PET bottle inclination control
A6 – Cover arresting button
A3 – Nozzle
A7 – PET bottle holder
A4 – Closure
A8 – Carbonator holder
A9 – Spare gasket
B–PETBottle
B1 – Cap
C–CO
2
PressureBottle
(carbonator), not included
GB
23 / 45
Summary of Contents for 4638
Page 3: ...3 MAX 2sec 3x P s s s 1 1 15 100 ml 1 9 40 ml 1 23 100 ml 1 9 40 ml 1 23 45...
Page 50: ......
Page 51: ......
Page 52: ...e 02 2016 DATE 3 3 2016...