ATTENTION
–
Always add syrups, ice or crushed in water that has been carbonated; otherwise
there is a risk of foaming and overflowing.
–
Do not shake the bottle! It releases the carbon dioxide from the water.
–
Follow the recommended instructions of the producer when batching the syrup; use it
according to your taste.
–
Do not use syrups after the use by date (expiration date). Store syrups in a cool and
dark place (see the instructions of the producer on the syrup packaging).
!
V. TROUBLESHOOTING
Problem
Cause
Solution
Water is
insufficiently
carbonated with
Co
2
Insufficient pressing of the
button
A1
Press the button
A1
more than once
Insufficient amount of water
in the bottle
Fill the bottle up with water up to the
guideline level
The water for carbonation is
warm
Use cold water
The carbonator is empty
Replace the carbonator with a new one
The carbonator is very cold
Wait until the carbonator reaches
ambient temperature
The carbonator is not
installed properly
Apply reasonable force to tighten the
carbonator
Disturbing noise
during water
carbonation
The carbonator is not
installed properly
Apply reasonable force to tighten the
carbonator
Worn-out or damaged
sealing
Check or replace sealing with
a corresponding new one
PET bottle is not properly
installed
Tighten the PET bottle end to end
Gas leaks after
the button
A1
has been
released
The carbonator valve is
damaged
Do not remove the bottle or the
carbonator. Let the gas leak and then
remove the carbonator (ATTENTION:
it may be very cold) and return it to the
supplier
Water foams
and leaks from
the bottle during
carbonation
Syrup has been added in
the bottle with water, ice or
crushed ice
Only use pure drinking water for
carbonation
26
GB
/ 45
Summary of Contents for 4638
Page 3: ...3 MAX 2sec 3x P s s s 1 1 15 100 ml 1 9 40 ml 1 23 100 ml 1 9 40 ml 1 23 45...
Page 50: ......
Page 51: ......
Page 52: ...e 02 2016 DATE 3 3 2016...
