eta Aquarelo 0262, Instructions For Use Manual

–  The product is intended for home use and similar (in shops, offices and similar workplaces, 

in hotels, motels and other residential environments, in facilities providing accommodation 

with breakfast). It is not intended for commercial use!

–  

Never use the appliance nor touch the adaptor with wet hands or feet!

–  

This appliance is designed solely for cleaning wet smooth surfaces (windows, 

mirrors, ceramic tiles and facing, etc.).

–  

Do not use this appliance to vacuum dust.

–  

Do not vacuum a larger quantity of liquids (max. 150ml).

–  Do not use foaming detergents, alcohol-based cleaning agents or any other flammable 

or aggressive detergents with this appliance.

–

  Never use (switch on) the vacuum cleaner if it is placed in the holder and it is being 

charged!

–  Always switch off the appliance when charging the battery and after the vacuum cleaner 

was used.

ADAPTER:

–  

If the adapter of this appliance is damaged, it must be replaced by 

the manufacturer, its service technician or a person with similar 

qualifications so as to avoid any danger.

–  Use the charger in a room only.

–  The adaptor supplied with this appliance is intended for this appliance only, do not use it 

for other purposes. Also, use only the supplied adaptor with this appliance, do not use any 

other adaptor for charging (e.g. from another appliance).

–  The power cord must not be damaged with sharp or hot objects, open fire, it must not be 

sunk into water or bent over sharp edges.

II.

 DESCRIPTION OF THE APPLIANCE (Fig. 1)

A – 

window cleaner drive

  A1 – 

ON/OFF

 button

  A2 – signal lights

  A3 – handle

  A4 – removable suction chamber

  A5 – suction chamber lock button

  A6 – power connector rubber cap

B 

–

 dirt container 

(max. 150 ml)

B1 – rubber plug with valve

C 

–

 squeegee 

(width 28 cm)

  C1 – squeegee lock button

D 

–

 detergent container 

(370 ml)

  D1 – sprayer

  D2 – textile mop

E 

–

adapter

III. APPLIANCE PREPARATION

Remove all packing material, take out the appliance and the accessories. Remove all possible 

adhesion foils, stick-on labels or paper from the appliance.

APPLIANCE ASSEMBLY

When assembling the appliance, follow the procedure indicated in Fig. 1. When removing the 

suction chamber 

A4

 and squeegee 

C

, make sure to press the corresponding lock buttons 

(

A5

, 

C1

) first.

ASSEMBLY OF THE DETERGENT CONTAINER

When assembling the container 

D

, follow the procedure indicated in Fig. 1.

16

GB

/ 29