background image

ETAtouch controller

Getting to know the control system

27

9.1.6

Getting started

9.1.6.1

System settings

Open the system configuration

By tapping the 

 symbol (in the lower left of the

screen), the system settings menu opens.

Fig. 9-14: Open the system configuration

In the system settings, among other things, the date
and time is set, the language of the control system is
set, and access to the remote "meinETA" system is
activated. 

With corresponding authorisation, the software for the
ETAtouch control system is updated in this menu.

Fig. 9-15: System configuration menu

To close the system settings, simply tap the 
symbol again.

9.1.6.2

Setting the language

Change the language using the ETAtouch control
system

The language used can be changed using the
ETAtouch control system For this, open the system
preferences 

 and tap the 

 [Language] symbol. A

settings window appears.

Fig. 9-16: Setting the language

Select the desired language. Following this, the
ETAtouch control system will appear in the chosen
language.

9.1.6.3

Setting the date and time

Setting the date and time

The date and time can be adjusted to the respective
time zone. The date and time are factory-set to Central
European Time (UTC+01:00). For setting on the
screen, tap the date or time. A settings window
appears.

Fig. 9-17: Date and time

Summary of Contents for TWIN 20 kW





















































































Reviews: