22
12 Assembly instructions accessories
Elastic strap
Holder
A
A
12:5 Cane holder, mounting
- Mount the holder on the back of
the wheel mount with the screws
and nuts supplied (A).
- Thread the elastic strap ‘double’
around the stick to make a loop
(see illustration).
The tip of the stick may have to
be removed to allow you to attach
the elastic.
- Place the stick in the holder and
stretch the elastic loop over the
push handle.
Tools: 4 mm Allen key,
10 mm spanner
The anti-tip consists of two parts:
- The anti-tip bar is mounted under
the wheel mount (see illus).
- The anti-tip bar is mounted
at the desired height (see illus).
A
3-7 cm
To allow you to negotiate thresholds
and the edges of thick carpets, a
distance of 3-7 cm from floor level
is recommended.
Tools: 5 mm Allen key
After adjusting the seat
height, centre of balance
or backrest angle, always
ensure that you check the
function of the anti-tip.
12:3 Anti-tips, mounting /cont.
Tools: 10 mm spanner.
(!)
Adjust the length so that the feet
are placed in the centre of the foot-
rest and do not come into contact
with the castors.
12:4 Heel strap
The heel strap is mounted on fold-
able footrests. It can be adjusted
length-wise.
Hole instructions for fitting the
screw are on the bottom of the
footrest. Front or back “corner” can
be used. Make the hole by drilling
(6 mm). Assembly instructions are
supplied with the heel strap.
