6
Molift Partner 255 / www.etac.com
How to use Molift Partner 255
The Hand control has 4 buttons for lifting and
lowering of lifting arm and leg spread mechanism
in and out.
The Hand control has an indicator
light that will illuminate when battery level is
low and the lifter requires charging
Hand Control 4 buttons
Art. no. 2018004
Lifting Arm - Up / Down
NB! The lifter is most unstable in top position.
Legs - In / Out
NB! Spreded legs gives increased stability and
better access to chair or toilet.
Hand control
General Safety Precautions
Only use accessories and slings that are adjusted
to fit the user, type of disability, size, weight and
type of transfer.
Working pause ratio/Duty Cycle.
Molift Partner 255
should not be run constantly
for more than 2 minutes (with maximum load),
and rest for minimum 18 minutes. Duty Cycle
10%. (Intermittence according to standard ISO-EN
10535)
Safe Working Load
The lifter is marked with Safe Working Load (SWL)
If maximum load (SWL) differs
between lifter suspension and body
support unit, then the lowest maxi-
mum load shall always be used
Molift lifters shall only be used to lift
persons. Never use the lifter to lift or
move objects of any kind.
Inspection to be performed daily or before use:
Make sure lifter has no visible damage, defects
or deformations
Make sure suspension connection and all
detachable parts are properly connected and
secured
Test emergency stop button and emergency
lowering
Make sure battery indicator is not illuminated
and service light is green
Make sure sling strap does not have visible
damage or frays.
Make sure wheels are rolling freely and lifter is
easy to manouvre
Test run lifters operation functions and make
sure lifter does not make any abnormal
sounds
If there are any faults or defects, the lift needs to
be taken out of operation and marked ”out of
order”
Before use / Daily check
