ETAS
Getting Started
ES430.1 - User’s Guide
54
6.2.7
Attaching ES400 Modules to Other Components Using
Cable Fasteners
Fig. 6
-
12
Openings for Cable Fasteners in ES400 Modules
Every module base has openings for two cable fasteners each on the right- and
left-hand side (see Fig. 6
12 on page 54). Just use cable fasteners to quickly
attach the modules to other components in the test environment in the imme
-
diate proximity of the measuring points.
Attaching ES400 Modules to Other Components Using Cable
Fasteners
With this method of attachment, you connect the ES400 module or ES400
module blocks to the component using additional cable fasteners inserted
through the openings of the modules. The integrated assembly elements of the
module are not used.
Fastening ES400 Modules on DIN Rails using Cable Fasteners
For this fastening variant, the ES400 module or ES400 module blocks are con
-
nected with an ES4xx angle bracket (right) or with an ES4xx angle bracket (left)
using additional cable fasteners inserted through the breakouts of the module.
The integrated assembly elements of the module are not used.
The modules fastened to the ES4xx angle bracket are subsequently attached to
the DIN rail.
Connecting the ES4xx Angle Bracket with the DIN rail
1. Place the ES4xx angle bracket onto the DIN rail.
2. Insert the hooks of the ES4xx angle bracket into the upper part
of the DIN rail.
3. Engage the ES4xx angle bracket in the DIN rail by pressing on
the ES4xx angle bracket or the module.
The module connected with the ES4xx angle bracket is fas
-
tened to the DIN rail.
CAUTION
When assembling the modules, observe the admissible temperature range of
the cable fasteners used!
