ES4408.1 Load Chassis - User’s Guide
17
ETAS
Getting Started
2.3
Power Supply
The ES4408.1 Load Chassis can be operated between 100 V and 230 V at 50 Hz
- 60 Hz; the maximum current consumption is 3,15 A.
2.3.1
Power Cables
Due to regional differences in the power supply, ETAS does not supply power
cord cables with the ES4408.1 Load Chassis. The following table contains details
of the relevant requirements and the ETAS order numbers.
DANGER!
Before you open the device, disconnect it from the power supply by
unplugging it.
Region
Description
Order
Number
General
AC supply cable with IEC 60320 C13 plug on
one end and a non-locking plug approved by
the national safety standards (with earth
contacts) on the other end. Plugs and cable
must be rated for min. 250 VAC/10 A or
125 VAC/15 A.
-
China
AC supply cable China for various ETAS
devices with PRC/3 and IEC 60320 C13 plug.
Rated for 250 VAC/10 A, 2.50 m length
F-04A-109-512
Europe
AC supply cable Europe for various ETAS
devices with CEE7/7 and IEC_60320 C13
plug. Rated for 250 VAC/10 A, 2.50 m length
F-04A-109-513
India
AC supply cable India for various ETAS devices
with IS 1293 (D) and IEC 60320 C13 plug.
Rated for 250 VAC/10 A, 2.50 m length
F-04A-109-514
Japan
AC supply cable Japan for various ETAS
devices with JIS C 8303 and IEC 60320 (C)13V
plug. Rated for 125 VAC/15 A, 2.50 m length
F-04A-109-515
North America AC supply cable North America for various
ETAS devices with NEMA 5/15 - IEC 60320
C13M plug. Rated for 125 VAC/15 A, 2.50 m
length
F-04A- 109-445
United
Kingdom
Power cord cable UK for various ETAS devices
with BS 1363/A and IEC 60320 C13 plug.
Rated for 250 VAC/10 A, 2.50 m length
F-04A-109-516
