ES4408.1 Load Chassis - User’s Guide
33
ETAS
Pin Assignment and Display Elements
4.5
Connector “Meas 7”
The measure signals from the load in slot 2 (connected to “Load 7”) are output
at the “Meas 7” connector.
Type: 9-pin DSUB (female)
Fig. 4-5
“Meas 7” Connector
The pin assignment is as follows:
Tab. 4-8
Pin Assignment: “Meas 7”
There is a special cable available for connecting the measure signals from
“Meas 7”, “Meas 8-1” and “Meas 8-2” to the “Measure” connector of the PT-
LABCAR (see "“CBAV343.1-1” Cable" on page 44).
Which signals of the relevant load are connected to which signals of the PT-LAB-
CAR is also described in the description of the cable.
Current Rating of the Connectors
Please note the maximum admissible current of 1 A (60 V) per pin/backplane
channel.
Connector:Pin
Backplane Connector
Meas 7:1
Slot 2:d10
Meas 7:2
Slot 2:z12
Meas 7:3
Slot 2:b12
Meas 7:4
Slot 2:d12
Meas 7:5
Slot 2:z14
Meas 7:6
Slot 2:b14
Meas 7:7
Slot 2:d14
Meas 7:8
Slot 2:z16
Meas 7:9
Slot 2:b16
Housing
5
4
3
2
1
9
8
7
6
