ES4408.1 Load Chassis - User’s Guide
34
Pin Assignment and Display Elements
ETAS
4.6
“Meas 8-1” and “Meas 8-2” Connectors
The measure signals of the loads in slot 0 (“Meas 8-2”) or slot 1 (“Meas 8-1”)
are output at the “Meas 8-1” and “Meas 8-2” connectors.
Type: 9-pin DSUB (female)
Fig. 4-6
“Meas 8-1” and “Meas 8-2” Connectors
The pin assignment is as follows:
Tab. 4-9
Pin Assignment: “Meas 8-1”
Tab. 4-10
Pin Assignment: “Meas 8-2”
There is a special cable available for connecting the measure signals from
“Meas 7”, “Meas 8-1” and “Meas 8-2” to the “Measure” connector of the PT-
LABCAR (see "“CBAV343.1-1” Cable" on page 44).
Which signals of the relevant load are connected to which signals of the PT-LAB-
CAR is also described in the description of the cable.
Connector:Pin
Backplane Connector
Meas 8-1:1
Slot 1:d10
Meas 8-1:2
Slot 1:z12
Meas 8-1:3
Slot 1:b12
Meas 8-1:4
Slot 1:d12
Meas 8-1:5
Slot 1:z14
Meas 8-1:6
Slot 1:b14
Meas 8-1:7
Slot 1:d14
Meas 8-1:8
Slot 1:z16
Meas 8-1:9
Slot 1:b16
Housing
Connector:Pin
Backplane Connector
Meas 8-2:1
Slot 0:d10
Meas 8-2:2
Slot 0:z12
Meas 8-2:3
Slot 0:b12
Meas 8-2:4
Slot 0:d12
Meas 8-2:5
Slot 0:z14
Meas 8-2:6
Slot 0:b14
Meas 8-2:7
Slot 0:d14
Meas 8-2:8
Slot 0:z16
Meas 8-2:9
Slot 0:b16
Housing
5
4
3
2
1
9
8
7
6
