ES4408.1 Load Chassis - User’s Guide
39
ETAS
Accessories
5.1.2
“
CBAV340.1-1
” Cable
This cable is used to connect the loads accessible at “Load 1”... “Load 6” and
their measure signals to the corresponding connectors “Load1”... “Load6” of
the PT-LABCAR.
Fig. 5-2
“CBAV340.1-1” Cable
Connectors and Wiring
ES4408.1 side: Hybrid DSUB 7W2
(female)
PT-LABCAR side: Hybrid DSUB 7W2
(male)
The assignment of the corresponding connectors on the ES4408.1 is described in
the section "“Load 1” ... “Load 6” Connectors" on page 27; for that of the con-
nectors of the PT-LABCAR, refer to the PT-LABCAR User’s Guide.
The wiring is 1:1 – the wires between pins A1 and A2 have a cross-section of
1.5 mm
2
, the others of 0.14 mm
2
.
For information on ordering this cable, refer to the section "Order Data"
on page 46.
