ES4408.1 Load Chassis - User’s Guide
43
ETAS
Accessories
5.1.4
“
CBAV342.1-1
” Cable
This cable is used to connect the loads made available at “Load 7” to the corre-
sponding “Load7” connector of the PT-LABCAR.
Fig. 5-4
“CBAV342.1-1” Cable
Connectors and Wiring
ES4408.1 side: Hybrid DSUB 8W8
(female)
PT-LABCAR side: Hybrid DSUB 8W8
(male)
The assignment of the corresponding connectors on the ES4408.1 is described in
the section "“Load 7” Connector" on page 30; for that of the connectors of the
PT-LABCAR, refer to the PT-LABCAR User’s Guide.
The wiring is 1:1 – the wires have a cross-section of 1.5 mm
2
.
For information on ordering this cable, refer to the section "Order Data"
on page 46.
1000 mm
