ES4408.1 Load Chassis - User’s Guide
44
Accessories
ETAS
5.1.5
“
CBAV343.1-1
” Cable
This cable is used to connect the measure signals made available at “Meas 7”,
“Meas 8-1” and “Meas 8-1” to the corresponding “Measure” connector of the
PT-LABCAR.
Fig. 5-5
“CBAV343.1-1” Cable
Connectors and Wiring
ES4408.1 side: 3 x DSUB9
(male)
PT-LABCAR side: DSUB25
(female)
The assignment of the corresponding connectors on the ES4408.1 is described in
the sections "Connector “Meas 7”" on page 33 and "“Meas 8-1” and
“Meas 8-2” Connectors" on page 34; for that of the connectors of the PT-LAB-
CAR, refer to the PT-LABCAR User’s Guide.
The assignment of the signals between these connectors is shown in Tab. 5-3
on page 45.
For information on ordering this cable, refer to the section "Order Data"
on page 46.
600 mm
400 mm
