ES4408.1 Load Chassis - User’s Guide
8
Introduction
ETAS
1.1.5
Connectors
The ES4408.1 Load Chassis has various connectors on the back (see Fig. 1-1
on page 9) for the following purposes:
• for connecting the various loads
• for the measure signals of the high current loads
• for the measure values of the position feedback for slot 3 and slot 4
• for supplying battery voltage
• for the Ethernet connection (with an ES4408CON.1 Communication Inter-
face)
• for the battery node control signals of the ES1391.1 Power Supply Con-
troller Board (with an ES4408CON.1 Communication Interface)
For a detailed description of the connectors, refer to the chapter "Pin Assign-
ment and Display Elements" on page 25 – the cables obtainable from ETAS for
connecting the loads to the PT-LABCAR are described in the chapter "Accesso-
ries" on page 37.
