ES5338.1 Carrier Board for Wheel Speed Sensor Simulation - User’s Guide
13
ETAS
Introduction
1.3
Identifications on the Product
The Following Symbols are used for Product Labeling:
Observe the information in the chapter "Technical Data and Standards"
on page 37.
1.3.1
CE Mark
With the CE mark attached to the product or its packaging, ETAS confirms that
the product corresponds to the product-specific, applicable European Directives.
The CE Declaration of Conformity for the product is available upon request.
1.3.2
RoHS Conformity
European Union
The EU Directive 2002/95/EU limits the use of certain dangerous materials for
electric and electronic devices (RoHS conformity).
ETAS confirms that the product meets this directive applicable in the European
Union.
Symbol
Description
The User's Guide must be read prior to the startup of the
product
Marking for CE conformity,
see "CE Mark" on page 13
Marking for China RoHS, see chapter,
see "RoHS Conformity" on page 13
Marking for conformity with WEEE directive,
see "Product Return and Recycling" on page 14
Marking for KCC Conformity,
see "KC marking" on page 14
