ES5338.1 Carrier Board for Wheel Speed Sensor Simulation - User’s Guide
33
ETAS
Connections and Plug Connections
4
Connections and Plug Connections
This section provides a description of the different connections of the ES5338.1
Carrier Board.
• "Backplane Connector CO200" on page 33
• "VG 96 Plug CO601" on page 35
4.1
Backplane Connector CO200
The backplane connector "CO200" forms the communication interface to the
ES5300.1-A Housing and to the ES5300.1-B Housing. The "CO200" also han-
dles the voltage supply for the ES5338.1 Carrier Board.
Type:
ERNI ERMet ZD 4-pair angled female multipoint connector (4-12) (order
no. 973099)
Counterplug (in ES5300):
ERNI ERMet ZD 4-pair straight male multipoint con-
nector (4-12) (order no. 973096)
Fig. 4-1
Connector to backplane (top view)
The assignment of the pins is as follows (the maximum possible pin assignment
for the ES5300.1-A Housing and the ES5300.1-B Housing is given):
WARNING!
Fire hazard!
Use only approved cables for creating cable assemblies (e.g. for con-
necting the ECU and external loads). The cables used must be suitable
particularly for occurring currents, voltages and temperatures and
must be flame-retardant in accordance with one of the following
standards IEC 60332-1-2, IEC 60332-2-2, UL 2556/UL1581VW-1!
12
11
10
9
7
8
6
5
4
3
2
1
h
g
e
d
f
b
a
c
