background image

ES5372.1-B 1 Slot Carrier Board for ES4455.2 and ES4456.2 - User’s Guide

14

Introduction

ETAS

Connecting/Disconnecting Devices 

To avoid injuries and hardware damages, observe the following precautionary
measures:

• Do not apply any voltages to the connections of the ES5372.1-B that do 

not correspond to the specifications of the respective connection.

• Do not connect or disconnect any devices while the ES5300.1-A Housing 

or ES5300.1-B Housing or external devices are switched on. First, switch 
off the ES5300.1-A Housing or ES5300.1-B Housing by shutting down the 
real-time PC and by activating the On/Off switch at the rear and unplug 
the power cable.

• When plugging in connectors, ensure that they are inserted straight and 

no pins are bent.

• When crimping the plug contacts of Positronic, use only the crimping tool 

intended for this purpose.

Maintenance

The product does not require maintenance.

Repairs

If an ETAS hardware product needs to be repaired, return the product to ETAS.

Cleaning

The product is not expected to require cleaning.

WARNING!

Risk of electric shock, fire hazard!
For safety reasons, the assembly of the ES5372.1-B and ES4456.2 
may be performed only at ETAS. If you purchased the two products 
individually, please contact your ETAS contact person so that the 
ES5372.1-B and the ES4456.2 can be returned to ETAS for assembly. 
Failure to observe it can lead to an incorrect pin assignment, damage 
to the board of the ES4456.2 or short circuits. This causes a risk of 
electric shock from high voltages and of fires.

CAUTION!

If cards (e.g. for startup or calibration) are unlocked but not com-
pletely removed from the housing, they must be pulled out far 
enough that the distance between the respective card and the back-
plane of the housing is at least 1 cm. Otherwise, contacts may be 
established between the cards and lead to their destruction.

Summary of Contents for ES5372.1-B















































Reviews: