ES720.1 - User’s Guide
42
Configurations and Applications
ETAS
6.1.3
Status Monitoring
The "ES720 Configurator" program displays status information during an ongo-
ing recording:
• an overview of the preconfigured settings and
• the current status of the recording of the ongoing measurement.
6.1.4
Interactions of the User
The "ES720 Configurator" program allows direct interaction of the user, e.g.
manual downloading of data or manual start of an experiment.
6.2
IP Address Management
6.2.1
ES720.1 and Configuration in INCA
For the INCA installed on the PC to be able to communicate with the ES720.1,
the Ethernet interface of the PC must be assigned a fixed IP address. The com-
munication is carried out directly between PC and ES720.1 or via modules
(ES600, ES592, ES593-D, ES595) connected to the Ethernet interface of the
ES720.1. Instructions for the configuration of the Ethernet interface with a fixed
IP address can be found in the document "INCA Quick Entry" or in the section
Network configuration in the user documentation of the operating system.
6.2.2
ES720.1 Machine Settings
In the ES720 Configurator, general parameters can be set in the "Machine Set-
tings" window, such as host name, IP addresses and DHCP activation as well as
date and time.
6.2.3
ES720.1 IP Address
The standard ETAS network, which is also used by the ES720.1, is a class 'C' IP
address of 192.168.40.xxx with the values 0 to 255 for xxx.
The ES720.1 is delivered with the IP address 192.168.40.228 (or 192.168.41.228
for the optional WLAN module) to remain compatible with other ETAS modules.
6.2.4
Several ES720.1 in a Network at the same Time
If several ES720.1 are to be used in a single network at the same time, the stan-
dard IP address, but not the Network Identifier, must be adjusted. To be able to
communicate with INCA and with other Ethernet modules of the ETAS standard
Ethernet network, the Network Identifier must contain 192.168.40.xxx.
6.2.5
Using the Remote Desktop
Access to the Windows XP Embedded operating system of the Drive Recorder is
possible via Remote Desktop with the following access data:
Account
DriveRecorder
Password
etases720dr
Next, the ES720 Configurator can be started.
Summary of Contents for ES720.1
