1. Change Mode
2. Change Intensity
3. Change Use Time
4. Change
Thermal Function
5. Change the Pad
in Use
When you want to change the mode of the pad you are using, touch the pad
button that you are using and touch mode buttons. Then the power stops.
Reselect the mode and then adjust intensity with the dial to operate the product.
The product operates only for the use time remaining. If you want to add more
use time, you can change it by touching the time button.
When you want to adjust the intensity of the pad, touch the pad selection
button and adjust it by turning the dial to the right or left.
If you touch the time adjustment button, it flickers and you can set the
desired time.
When you change the time, is adjusted to the same time for all pads in use.
You can change the thermal function of the abdomen pad (or Kegel pad)
and foot pad to OFF or ON by touching the thermal button during use.
If you want to change pads in use, you can just change the pad button in the
case of mounted pads. If you stop during use, press the pad selection button.
The operation stops.
Checklist after Use
1. Does the light of the LED and buttons turn off when you power off the display part?
2. Has the power cord been disconnected from the outlet?
Check list before Use
1. Is the power cord connected to the outlet normally?
Change During Use
6. Product Storage and Management Method
Self-inspection
5. How to Use