Prepare for Installation
11
Chapter 2
Prepare for Installation
This chapter details the installation and wire termination for each ArcLamp System product.
WARNING:
RISK OF ELECTRIC SHOCK! LED Retrofit Kit installation requires
knowledge of luminaire electrical systems. If not qualified, do not attempt
installation. Contact a qualified electrician.
AVERTISSEMENT :
RISQUE DE CHOC ELECTRIQUE! L'installation du kit de
conversion LED nécessite une connaissance des systèmes électriques des
luminaires. N'entreprenez pas l'installation si vous n'êtes pas qualifié.
Contactez un électricien qualifié.
WARNING:
RISK OF ELECTRIC SHOCK! Risk of fire or electric shock. Install
this kit only in the luminaires that have the construction features and
dimensions shown in the photographs and/or drawings.
Do not make or alter any open holes in an enclosure of wiring or electrical
components during kit installation.
AVERTISSEMENT :
RISQUE DE CHOC ÉLECTRIQUE! Risque d'incendie ou
de choc électrique. Installez ce kit uniquement dans des luminaires qui ont
les caractéristiques de construction et les dimensions indiquées sur les
photographies et / ou les dessins.
Ne percez ou ne modifiez aucun trou ouvert dans un boîtier de câblage ou
de composants électriques pendant l'installation du kit.
WARNING:
To prevent wiring damage or abrasion, do not expose wiring
to edges of sheet metal or other sharp objects
AVERTISSEMENT :
Pour éviter les dommages ou l'abrasion du câblage,
n'exposez pas le câblage aux bords du métal ou autres objets pointus.