Echoflex Installation Guide
Phase Adaptive Dimmer
Phase Adaptive Dimmer (ER6CD/ER12CD)
Page 4 of 12
Echoflex
Wiring Diagram
Electrical Terminations
Power to the controller is connected between the White (Neutral) and the
Black or Brown Line power (120 or 277 VAC), respectively. The orange wire
is an antenna. Do not cut, cap, or connect this wire. Use only UL-approved
wire when making connections to the controller (see table below).
Controller Interface
The controller has two LEDs and two lever-type buttons located below the
label.
Power LED and Learn LED
The Power and Learn LEDs can display green, blue, or red. LED color and
combinations indicate whether the controller is providing information via
blink codes or is in an operational mode. See
Connection
Color
Specification
Load
Red
14 AWG, 600 V
Neutral
White
14 AWG, 600 V
Line
Black or Brown
14 AWG, 600 V
Neutral - To other fixtures
Black - Line, 120 V or
Brown - Line, 277 V
White - Neutral
To other 120 V or 277 V fixtures
Green/Yellow Ground
ER12CD-AU
1200 W Dimmer
Dimmable
Lighting
Fixture
