5
Source Four Mini Low Voltage User Manual
Shaping the Beam
The beam can be shaped using the four shutters or with a pattern.
The Source Four Mini has four shutters:
left, right, top, and bottom. Each shutter
can be pulled out or pushed in to create
the desired beam shape.
Color Frame Holder
Source Four Mini lens tubes ship with a 2 ¾” or 70mm color frame, which is a metal
frame used to hold color media (often referred to as gel) in front of the lens. The
color frame holder is equipped with a retaining clip that prevents the color frame
from falling out during use.
W A R N I N G :
Make sure the color frame is locked in position with the retaining
clip.
1” Diameter
Pattern Projection
The Source Four Mini Low Voltage luminaire has a
pattern holder slot on the top side of the shutter
barrel, in front of the shutter. It accommodates a E-
size (37.5mm with a 25.4mm image area) pattern
holder.
Use an optional donut in the color frame holder to
enhance pattern projection.
When the slot is not in use, a small sheet metal cover
secured with a Phillips screw prevents light leakage.
Step 1:
Use a Phillips screwdriver to loosen the
screw on the slot cover.
Do not
remove the
screw.
Step 2:
Slide the cover completely forward to
expose the slot.
Step 3:
Insert the pattern holder.
Step 4:
Slide the slot cover back toward the
shutters until it meets the pattern handle.
Leave enough space to move the handle.
Step 5:
Secure the slot cover by tightening the
screw.
Summary of Contents for Source Four Mini LED
Page 2: ......
