4
Adjustments
Adjusting the yoke position
The Source Four Mini Low Voltage luminaire provides multi-positioning capabilities
within its yoke for overall luminaire angle.
Setting the angle with the yoke
Step 1:
Loosen the yoke locking knob.
Do not
remove the knob.
Step 2:
Tilt the luminaire to the desired position.
Step 3:
Tighten the yoke locking knob to secure position.
Focusing the beam
Step 1:
Loosen the beam
focus knob located
under the barrel.
Do
not
remove the knob.
Step 2:
Slide the lens tube
forward or backward to
achieve the desired
beam edge.
Step 3:
Once the luminaire is
focused, tighten the
beam focus knob.
Yoke locking
knob
Beam focus knob
Summary of Contents for Source Four Mini LED
Page 2: ......
