19
TurboRay User Manual
Set the Pan/Tilt Options
Navigate: Main Menu
→
Settings
→
Pan/Tilt
Parameter
Value
Description
Pan Invert
Off
On
When set to On, inverts pan movement of the fixture to
the opposite direction. The default setting is Off.
Tilt Invert
Off
On
When set to On, inverts tilt movement of the fixture to
the opposite direction. The default setting is Off.
Pan/Tilt Swap
Off
On
When set to On, pan responds to the tilt channels and tilt
responds to the pan channels. The default setting is Off.
Pan/Tilt Feedback
Off
On
When set to On, the pan and tilt encoder's will
feedback, correcting the fixture position when it has
been manually moved outside of control. You may want
to turn Pan/Tilt Feedback to the Off setting when
working on a fixture so that you can move the pan and
tilt without correction. The default setting is On.
Set the Dimming Options
Navigate: Main Menu
→
Settings
→
Dimming
Parameter
Value
Description
Curve
Square Law
Inv Square Law
S Curve
Linear
Set the dimming curve. The default setting is
Square Law.
PWM Frequency
17.6 kHz
4.4 kHz
2.2 kHz
1.1 kHz
Set the frequency in Hz at which the LED array
pulses, or blinks, as a function of Pulse Width
Modulation (PWM). The frequency is adjustable
in order to avoid visible flicker on video and
film. The default setting is 17.6 kHz.
Red Shift
On
Off
When set to On, the output replicates the
warming of an incandescent filament's color
temperature change as it dims. The default
setting is Off.
