21
TurboRay User Manual
Home/Test Menu
Navigate: Main Menu
→
Home/Test
The Home/Test menu provides access to rehome and test the TurboRay fixture mechanical
features and attributes.
The fixture must be powered prior to rehoming or testing features and attributes. If you do not
provide power, the fixture will use battery power to power only the user interface.
Home Options
Navigate: Main Menu
→
Home/Test
→
Home
Home (reset) the selected features:
•
All - homes all mechanical features of the fixture including pan, tilt, color, gobo, diffusion,
and zoom
•
Pan/Tilt - homes the pan and tilt
•
Color - homes the color wheel
•
Gobo - homes the gobo wheel
•
Diffusion - homes the primary (radial) diffuser
•
Zoom - homes the optics system
Test Options
Navigate: Main Menu
→
Home/Test
→
Test
Run a self-test program on features and attributes of the TurboRay fixture. When you run the
test, the display indicates "Running" and the fixture automatically runs a self-test procedure,
testing each of the functions. Press [MODE/ESC] button to end the self-test and return the
display to the previous menu.
•
All - runs a self-test on all mechanical features of the fixture including pan, tilt, color,
gobo, diffusion, and zoom
•
Pan/Tilt - runs a self-test on the pan and tilt
•
Color - runs a self-test on the color wheel
•
Gobo - runs a self-test on the gobo wheel
•
Diffusion - runs a self-test on the primary (radial) diffuser
•
Zoom - runs a self-test on the optics system
•
Light Engines - runs a self-test on the LEDs
