POWER SUPPLY
Caution:
1. Don't operate the adaptor with wet hands!!
Adaptor
Battery
2
For SD card logger series, it can be powered by 9VDC adaptor
and 4pcs AA batteries.
The power jack is on the right side on the meter.
The SD logger can be powered by 4 pcs AA batteries as well.
While in logging status, the battery can last a period of time.
Suggest to use adaptor for long term operation.
Low battery might cause improper operation and reading. When
battery level is lower than certain range, the logging function will
be t
erminate
d.
If the low battery icon appeared on the LCD, please remove the
battery cover from the rear side and replaced 4 new AA batteries
into the battery compartment. Please check the polarity and
make good contact.
Caution:
1.The battery life will be shorten when using a high capacity SD
card or in high/low operating temperature.
2.Please remove the batteries before long term storage.
3.To avoid battery leakage, please do not mixes use the new and
old batteries.
4.Please follow your local law for battery disposition.
