E-8
SPECIFICATIONS
AC-POWER SUPPLY : ...................................... AC 120V , 60 Hz
AC-POWER CONSUMPTION : .......................... 30W
SPEAKER : ......................................................... 4” x 2 2” X 2 TWEETER
SPEAKER CAPACITY POWER : .........................10W X 2 (4 Ohm)
AMPLIFIER MAXIMUM POWER : ....................... 10 W
TUNER- FREQUENCY : ..................................... AM 530 - 1710 k Hz
FM 88 - 108 MHz
~
THE APPARATUS SHOULD NOT BE EXPOSED TO DRIPPING OR SPLASHING
AND NO OBJECTS FILLED WITH LIQUIDS SHOULD BE PLACED ON THE
APPARATUS.
- THE DISPLAY WILL NOW INDICATE THE EXACT SONG SEQUENCE IN MEMORY
BY DISPLAYING ALL THE SONG NUMBERS RAPIDLY.
- ALSO, THE SYMBOL WILL REMAIN "ON" TO INDICATE THAT YOU
HAVE SAVED A PROGRAM-MEMORY (SEQUENCE).
- PRESSING PLAY WILL NOW PLAY BACK THE "SAVED SEQUENCE" IN
THE PROGRAM MEMORY.
- PRESSING NEXT/ BLACK WILL MOVE TO THE NEXT OR PREVIOUS SONG
IN THE SAVED SEQUENCE.
- TO CLEAR (CANCEL) THE ENTIRE PROGRAM WHICH IS STORED IN THE MEMORY,
SIMPLY PRESS "STOP" TWICE, OR SWITCH "OFF" THE SET.
Prog
E-7
NORMAL CD OPERATION
- INSERT A CD AS DESCRIBED. SET THE FUNCTION SWITCH TO "CD".
- ONCE THE CD-DOOR IS CLOSED (WITH A DISC INSIDE) THE SET WILL IMMEDIATELY
READ THE DISC AND DISPLAY THE NUMBER OF SONGS (TRACKS) ON THE CD.
- PRESS THE PLAY/PAUSE SWITCH . THE DISK WILL START SPINNING AND THE
FIRST SONG (TRACK) WILL START PLAYING. THE DISPLAY WILL INDICATE THE
CURRENT TRACK NUMBER. ("1" IF IT IS THE FIRST TRACK).
- AT ANYTIME DURING PLAYBACK, PRESS THE "STOP" SWITCH TO STOP
OPERATION OF THE SET. THIS WILL RESET THE SET TO THE FIRST TRACK (IF YOU
PRESS PLAY AFTER STOP, THE FIRST TRACK WILL ALWAYS START PLAYING). HOWEVER,
THE DIGITAL DISPLAY WILL SHOW THE TOTAL NUMBER OF TRACKS ON THE DISC.
- AT ANYTIME DURING PLAYBACK, "PRESS AND RELEASE" THE SEEK/SCAN SWITCHES :
"BACK" OR "NEXT" TO SKIP BACKWARDS OR FORWARDS BY ONE TRACK, AS DESIRED.
- AT ANYTIME DURING PLAYBACK, "PRESS AND HOLD" THE SEEK/SCAN SWITCHES :
"BACK" OR "NEXT" TO FAST-REVERSE OR FAST-FORWARD THE SPECIFIC TRACK,
WHICH IS CURRENTLY PLAYING.
- AT ANYTIME DURING PLAYBACK, PRESS THE "CD REPEAT SWITCH" AS FOLLOWS:
PRESS ONCE = TO REPEAT THE CURRENT TRACK (REPEAT SYMBOL WILL "FLASH")
PRESS TWICE = TO REPEAT ALL TRACKS (FULL CD) (REPEAT SYMBOL WILL STAY "ON")
- TO PAUSE PLAY BACK AT ANYTIME DURING PLAYBACK, PRESS THE "PLAY/PAUSE"
SWITCH . PRESS PLAY/PAUSE SWITCH TO RESUME OPERATION AT THE
SAME TRACK AND POSITION.
P
PROGRAMMING THE CD-PLAYER
- THE CD PLAYER CAN BE PROGRAMMED TO PLAY ANY SEQUENCE OF UPTO
20 TRACKS, AS DESIRED.
- ALWAYS PRESS THE STOP SWITCH BEFORE STARTING THE PROGRAMMING.
- PRESS THE PROGRAM SWITCH ,THE DISPLAY WILL SHOW A FLASHING
SYMBOL AND THE DISPLAY WILL SHOW “ ” (FLASHING), TO INDICATE
THAT THE SET IS NOW IN "MEMORY PROGRAMMING MODE", AT MEMORY
POSITION NO. 1.
- REPEAT THE PREVIOUS 2 STEPS, EACH TIME SELECTING ANY TRACK NUMBER
OF YOUR CHOICE TO BE STORED IN THE SUCCESSIVE MEMORY (PROGRAM)
POSITIONS.
- WHEN YOU PRESS THE DISPLAY WILL ADVANCE TO THE NEXT MEMORY
POSITION NUMBER (EG. “ ” FOR 2ND POSITION).
- PRESS THE NEXT/BACK SWITCHES TO SELECT THE TRACK (SONG)
NUMBER YOU WISH TO BE STORED IN THE FIRST MEMORY (PROGRAM)
POSITION, AND PRESS (PROGRAM) TO CONFIRM YOUR SELECTION.
P
P
- AFTER EACH TRACK NUMBER, REMEMBER TO PRESS THE PROGRAM SWITCH .
- AFTER A MAXIMUM OF 20 SONGS (OR LESS) HAVE BEEN SELECTED AS
DESCRIBED ABOVE, PRESS THE SWITCH.
P
Prog
0 1
0 2
P
