8
RADIO OPERATION
1
. Set the function switch to
Radio
FM
Select FM on the band selector switch. Turn the TUNING knob to select the station. The FM
stereo indicator light will show a stereo broadcast is being received
.
FM STEREO RECEPTION
For reception of a FM stereo broadcast station, set the AM/FM/FM ST. switch to FM ST.
position. The FM ST. indicator on the LCD display will light up when a FM STEREO broadcast
is being received.
AM
Select AM on band selector switch. Turn the TUNING knob to select the station. This set has
a built-in AM antenna. It may be necessary to change the position of the unit for the best AM
signal strength.
DISPLAY AND CLOCK ADJUSTMENT
When the clock function is outlined, the display will show the clock.
Adjusting the clock
1
. Press the
PROGRAM
button to adjust clock when clock display.
2. Press
SKIP
or
SEARCH
button to choose 12H or 24H.
3. Press
PROGRAM
button to keep the selection of 12H or /24H and then go to the next clock
adjustment mode.
4. Press
SKIP
or
SEARCH
button to select the hour data.
5. Repeat steps 3 and 4 to select the minute data.
6. Press
PROGRAM
to set the clock.
