background image

10

LIMITED SIX-YEAR MOUNT WARRANTY

ETEC USA warrants this product to be free from defects in material and workmanship for a six-year period after pur-
chase. We will repair or replace the unit free of charge should it become defective under this warranty. 

Should you have any missing or defective assembly hardware (screws, etc.), please contact the retailer to secure a 
replacement for those parts. It should not be necessary to bring the entire unit to the store but instead bring the parts list 
to accurately identify the missing piece(s) and obtain replacements. Should you prefer, you can contact us by email at 
service@etecusa.com. 

If you need to process a warranty claim for a defective part (not including assembly hardware), you, the original purchas-
er, should submit a copy of the original sales slip along with the model number, part number and a detailed description 
of the problem with that part. You may send the required information either via email to service@etecusa.com or, should 
you prefer, you may send the information via US mail to: 

ETEC USA

823 Old Settlers Trail

Suite 100

Hopkins, Minnesota  55343

Please also include a phone number, for a faster process should we need to contact you for any reason. Failure to attach 
or enclose the required information may result in a delay processing your request.

ETEC USA will warrant all mount parts and components described in the parts list of this model. The warranty covers 
defective material and workmanship and applies under normal use. Our mounts are not intended for outdoor use. 

This warranty does not cover any product, which has been subject to damage due to improper assembly or disassembly, 
an act of nature, misuse, neglect, accident, abuse, commercial use, or modification of, or to, any part of the product. Also 
not covered are assembly costs, any labor or labor cost incurred for any reason, products purchased from unauthorized 
ETEC sellers or costs incurred in shipping the unit or part for warranty repair. Under no circumstances shall ETEC USA, 
be liable for any loss (direct, indirect, incidental, foreseen, unforeseen, special or consequential) or for any damage aris-
ing out of, or in connection with, the use of this product

This warranty does not cover product sold ‘As Is’.

This warranty is void if the mount has been moved from its initial installation location.

This warranty is valid only in the United States and grants specific legal rights

.

Summary of Contents for E580TM













Reviews: