![background image](http://html.mh-extra.com/html/etec/eph1020/eph1020_manual_2431954002.webp)
Using the Setup Mode
With the phone on the hook, press and hold the [
SET
] button for at least 3 seconds to enter
the Setup Mode. The LCD will display “SET | DATE” on the first screen of the Setup Mode.
Use the [
UP
] button to change between the different setting options and the LCD will display
the corresponding setting items. Press the [
SET
] button again to enter one specific setting
item. Use the [
UP
] button to adjust the specific setting items you wish to change. When
finished changing the settings press the [
DEL
] button to exit the Setup Mode.
Date/Time Setting
When the LCD display shows “SET | DATE”, press the [
SET
] button to confirm. The LCD will
then display “SET6 FLASH”, and enter the Date/Time setting. The LCD display will begin by
flashing the Year. Press the [
UP
] button to change the Year number then press the [
SET
]
button to confirm. The LCD will now enter the Month Setting. Press the [
UP
] button to change
the Month number then press the [
SET
] button to confirm. The LCD will now enter the
Date/Hour/Minute Setting. Press the [
UP
] button to change the Date/Hour/Minute settings
respectively pressing the [
SET
] button each time to confirm the correct number.
Local Area Code Setting
When the LCD display shows “SET 2 CODE”, press the [
SET
] button to confirm. The LCD will
then display “CODE *****”. Press the [
SET
] button to enter the Area Code setting, the first “*”
will begin to flash (if the Area Code was previously set, the LCD will display the previously-set
area code numbers, and the first number of the area code will flash). Press the [
UP
] button to
enter the correct number for the first number of your area code, then press the [
SET
] button
to confirm. Repeat this process to enter the rest of the area code numbers.
Tone/Pulse Setting
When the LCD display shows “SEE 5 P-E”, press the [
SET
] button to enter the TONE/PULSE
setting. Press the [
UP
] button to switch between “P00E” (for TONE), or “PULSE”, then press
the [
SET
] button to confirm.
Caller ID
When receiving a new call, the phone will automatically detects and displays the Caller ID,
the date, the time, and records this information in the Caller ID memory.
Reviewing the Caller ID History for Incoming Calls
With the phone on the hook, press the [
UP
] button to review the number, date and time of the
incoming Call History.
Redial a Previous Incoming Call
After finding the incoming call in the Caller ID History, press the [
DIAL
] button to auto dial the
selected number.