Etec P6900, Owner'S Manual

5

added and the oldest call will be deleted from memory.   

z

SETTING UP 

Note: Please make sure the telephone cords are properly connected and 3- 

“AAA” batteries and/or a 9V- AC adapter are used before starting the setup of this 

phone. 

To start, press the [SET/STORE] button to enter the “SETTING” mode. The 

“SETTING” mode includes: Selection of Language, Area Code Setting, Long 

Distance Access, Date/Time Setting, LCD Contrast Adjustment, Baby Call 

Function, Phonebook Entry Input and Phonebook Edit. 

To exit the “SETTING” mode at any time, simply press the Delete Key [DEL]. 

When in the “SETTING” mode and there is no operation performed for more than 

8 seconds, the system will exit automatically back to the start screen. 

FIRST: Press the [SET/STORE] button and then press the “ARROW UP” button 

on the right side to access each setup function. 

1.  Set Language Selection 

- 

For ‘LANGUAGE SELECTION, press [SET/STORE] again and the word ENGLISH 

will show in the display. For another language, press the “ARROW UP” or 

“ARROW DOWN” button until you find the language you want. The choices are: 

ENGLISH (English), FRANÇOIS (French), ESPANOLA (Spanish), ITALIANO 

(Italian), DEUTSCH (German), TURKISH (Turkish), DENMARK (Danish). Once 

the display shows the language you want, to finish, press [SET/STORE] button 

again to confirm. 

2. Set Area code 

- 

To set your Area Code, press [SET/STORE] and then “ARROW UP” until “SET 

AREA CODE” appears in the display. Then press [SET/STORE] again and use the 

“ARROW UP” or “ARROW DOWN” buttons to select the first digit of the area. 

Once you have the first digit, then press [SET/STORE] again to move to second 

digit and repeat for the third digit. 

3. Long Distance Access Code 

- 

If you need to select a Long Distance Access Code, press [SET/STORE] and then 

“ARROW UP” until “LONG DIST ACCESS” appears in the display. Then press 

[SET/STORE] again and use the “ARROW UP” or “ARROW DOWN” buttons to 

select the first digit of the Long Distance Access Code. Once you have the first 

digit, then press [SET/STORE] again to move to the second digit and repeat for up