15
EN
NIT
T
NIT
T
Zero / Tare Function
When you measure items inside a container, you can use
the Tare function to remove the container’s weight from the
final measurement.
1.
Press
TARE
to turn on the scale. Make sure the display reads
“
”. If the screen does not display “
” automatically,
press
TARE
to auto-adjust to zero.
2.
Place the container on the center of the scale.
3.
Wait for the reading on the display to stabilize. The display
will show the container’s weight.
4.
Press
TARE
to tare the weight of the container. The screen
should now display “
”.
5.
Place the liquid or items into the container. The scale will
measure the contents without including the weight of the
container. [
Figure 2.1
]
6.
When you’re done, reset the scale by removing all weight
and pressing
TARE
again.
Figure 2.1
Summary of Contents for EK9000
Page 77: ...77 Notes ...
Page 78: ...78 Notes Back to Table of Contents ...
Page 80: ...Building on better living AU0220GY M1_0220EK9000_eu ...
