10
1.
Tap
Z/T/ON/OFF
to turn on the scale. Make sure the display shows
“0.00”.
[Figure 1.5]
2.
Tap
UNIT
to select your desired measuring unit, which will show on
the right of the display.
3.
Place the container on the scale.
4.
Wait for the reading on the display to stabilize. The display will show the
container’s weight.
5.
Tap
Z/T/ON/OFF
to tare the weight of the container. The display
should now show “0.00”.
[Figure 1.6]
6.
Place the liquid or items in the container. The scale will measure the
contents without including the weight of the container.
[Figure 1.7]
7.
When you’re done, reset the scale by removing all weight and tapping
Z/T/ON/OFF
again.
Whenever you measure items inside a container, you can use the Tare
function to remove the container’s weight from the final measurement.
Zero / Tare Function
[Figure 1.5]
[Figure 1.6]
[Figure 1.7]
