12
1.
Press
to turn on the scale. Make sure the display reads
“
0.00
”. If the screen does not display “
0.00
” automatically, press
to auto-adjust to zero.
2.
Place the container on the center of the scale.
3.
Wait for the reading on the display to stabilize. The display will
show the container’s weight.
4.
Press
to tare the weight of the container. The screen
should now display “
0.00
”.
5.
Place the liquid or items into the container. The scale will
measure the contents without including the weight of the
container.
6.
When you’re done, reset the scale by removing all weight and
pressing
again.
When you measure items inside a container, you can use the
Tare function to remove the container’s weight from the final
measurement.
ZERO / Tare Function
