background image

Model:

  

LEDMIRROR

LED Mirror Light With Dual Voltage Shaver Socket

These instructions are provided as a guideline to assist you.

 

PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLATION  

AND RETAIN FOR FUTURE REFERENCE

Pack contents:

1 x LED mirror light
1 x Fixing kit

INSTALLATION INSTRUCTIONS

A guide for qualified electricians

EVENTUALLY, YOU MAY WANT TO 

REPLACE THIS PRODUCT:

Regulations require the recycling of Waste from 

Electrical and Electronic Equipment (European 

“WEEE Directive” effective August 2005—UK 

WEEE Regulations effective 2nd January 2007). 

Environment Agency Registered Producer: WEE/

GA0248QZ. 

WHEN YOUR PRODUCT COMES TO THE END OF 

ITS LIFE OR YOU CHOOSE TO REPLACE IT, PLEASE 

RECYCLE IT WHERE FACILITIES EXIST - DO NOT 

DISPOSE WITH HOUSEHOLD WASTE.

CLEANING:

Clean this light fitting only with a soft dry cloth.

Do not use any chemical or abrasive cleaners.

 

IF YOU EXPERIENCE PROBLEMS:

If you believe your product is defective, please return 

it to the place where you bought it. Our Technical 

Team will gladly advise on any Eterna Lighting 

product, but may not be able to give specific 

instructions regarding individual installations.

Email: sales@eterna-lighting.co.uk / technical@eterna-lighting.co.uk

Visit our website: 

www.eterna-lighting.co.uk

Made in China

Issue 1018

874/2012

MODELNO.

LEDMIRROR

LED LAMP SPECIFICATIONS:

Luminaire lumens (with 

diffuser) 

130 lm

Lumens from chip (no 

diffuser) 

820 lm

Useful lumens

762 lm

Rated Wattage

10.3W

Rated luminous flux

762 lm

Nominal life time of the lamp

30,000 hrs

Colour temperature

3000K

Number of switching cycles 

before premature lamp 

failure

15,000

Warm-up time up to 60% of 

the full light output 

Instant full light

Dimmable

No

Nominal beam angle

120°

Rated power

10.3W

Rated lamp lifetime

30,000 hrs

Lamp power factor

>0.5

Lumen maintenance factor at 

end of nominal life

70%

Starting time

<0.5s

Colour rendering

>80

Colour consistency

Within a six step 

Macadam ellipse

Rated peak intensity

246cd

Rated beam angle

120°

Voltage / Frequency

240V~50Hz

Not suitable for accent lighting

Reviews: