Issue 2013
Model:
SAP70MINI / SAPMINIPC
SON Bulkhead / SON Bulkhead With Photocell
These instructions are provided as a guideline to assist you.
PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLATION
AND RETAIN FOR FUTURE REFERENCE
Pack contents:
1 x Fitting
1 x Fixing kit
FOR PRODUCT ADvICE:
• T: 01933 673 144
• F: 01933 678 083
• E: sales@eterna-lighting.co.uk
Visit our website:
www.eterna-lighting.co.uk
INSTALLATION INSTRUCTIONS
A guide for qualified electricians
Ballast EEI - B2
LAMP REPLACEMENT:
Switch off the electricity at the mains.
Remove front cover.
Remove and replace lamp.
Secure cover.
Restore the power and switch on.
REPLACEMENT LAMP TyPE:
Requires 1 suitable ES SON E internal ignitor energy
saving lamp (not included).
Fitting is rated at 70W max.
CLEANINg:
Disconnect the power and clean the exterior only of
this fitting with a moist (not wet) cloth.
Do not use any chemical or abrasive cleaners.
EvENTUALLy, yOU MAy WANT TO
REPLACE THIS PRODUCT:
Regulations require the recycling of Waste from
Electrical and Electronic Equipment (European
“WEEE Directive” effective August 2005—UK
WEEE Regulations effective 2nd January 2007).
Environment Agency Registered Producer: WEE/
GA0248QZ.
WhEN yOUR PRODUcT cOMES TO ThE END OF
ITS lIFE OR yOU chOOSE TO REPlAcE IT, PlEASE
REcyclE IT WhERE FAcIlITIES ExIST - DO NOT
DISPOSE WITh hOUSEhOlD WASTE.
IF yOU ExPERIENCE PROBLEMS:
If you believe your product is defective, please return
it to the place where you bought it. Our Technical
Team will gladly advise on any Eterna lighting
product, but may not be able to give specific
instructions regarding individual installations.
874/2012
MODELNO.
SON Bulkheads
