background image

Model:  

WELLBKSTD / WELLWHSTD

WELLBKPIR / WELLWHPIR

Polycarbonate LED Well Glass Fitting 

With Optional Corner Bracket

These instructions are provided as a guideline to assist you.

 

PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLATION  

AND RETAIN FOR FUTURE REFERENCE

A guide for qualified electricians

Pack contents:

1 x Well glass fitting

1 x  Corner & wall 

bracket assembly

1 x Fixing kit

INSTALLATION INSTRUCTIONS

Email: sales@eterna-lighting.co.uk / technical@eterna-lighting.co.uk

 Visit our website: 

www.eterna-lighting.co.uk

Made in China

Issue 0519

874/2012

MODELNO.

WELL_STD_PIR

LED LAMP SPECIFICATIONS:

Luminaire lumens (with diffuser) 

660 lm

Lumens from chip (no diffuser) 

900 lm

Useful lumens

660 lm

Rated Wattage

10W

Rated luminous flux

660 lm

Nominal life time of the lamp

25,000 hrs

Colour temperature

4000K

Number of switching cycles 

before premature lamp failure

12,500

Warm-up time up to 60% of the 

full light output 

Instant Full Light

Dimmable

No

Nominal beam angle

120°

Rated power

10W

Rated lamp lifetime

25,000 hrs

Lamp power factor

>0.5

Lumen maintenance factor at 

end of nominal life

70

Starting time

0.5s

Colour rendering

≥80

Colour consistency

Within a six step 

Macadam ellipse

Rated peak intensity

214cd

Rated beam angle

120°

Voltage / Frequency

240V~50Hz

Not suitable for accent lighting

EVENTUALLY, YOU MAY WANT TO 

REPLACE THIS PRODUCT:

Regulations require the recycling of Waste from 

Electrical and Electronic Equipment (European 

“WEEE Directive” effective August 2005—UK 

WEEE Regulations effective 2nd January 2007). 

Environment Agency Registered Producer: WEE/

GA0248QZ. 

WHEN YOUR PRODUCT COMES TO THE END OF 

ITS LIFE OR YOU CHOOSE TO REPLACE IT, PLEASE 

RECYCLE IT WHERE FACILITIES EXIST - DO NOT 

DISPOSE WITH HOUSEHOLD WASTE.

 

LAMP REPLACEMENT:

The light source of this luminaire is not replaceable; 

when the light source reaches its end of life the 

whole luminaire shall be replaced.

CLEANING:

Disconnect the power and clean the exterior only of 

this fitting with a moist (not wet) cloth.

Do not use any chemical or abrasive cleaners.

 

IF YOU EXPERIENCE PROBLEMS:

If you believe your product is defective, please return 

it to the place where you bought it. Our Technical 

Team will gladly advise on any Eterna Lighting 

product, but may not be able to give specific 

instructions regarding individual installations.

Reviews: