FIRST TIME USE
Press the ‘’ON/OFF’’ switch down to « ON » position and the light sensor will control the light
automatically. When the environment gets dark, the solar light will turn on and use the energy
stored in the battery. If you press the switch again, the solar light will turn off to save energy. If
the solar light does not turn on automatically at night after 6 hours of charging during the day,
please verify the followings:
1)
Make sure the power switch is at the “ON” position.
2)
Check the battery and make sure it’s securely in contact with the terminal.
3)
Make sure the solar light is in a sunny location and the solar panel can receive direct sunlight.
4)
If the model doesn’t include an “ON/OFF” switch, please remove the battery protection tip near
the battery before using it.
CAUTION
1)
Please note, the solar light is designed to work when the environment gets dark. The
selected location should not be near a light source such as street lights, as these might
keep the solar lights from automatically turning on.
2)
Although the battery has been charged by the manufacturer, the electric charge may
have dropped by the time the customer receives the product. Please let the solar light
charge for a full day for maximum performance.
3)
The surface of the solar panel must remain clean. Dust accumulation on the surface will
reduce the charging efficiency
SAVE THESE INSTRUCTIONS FOR FUTURES REFERENCES.
Made in China
