IPL ROUTER SET-UP
Ethernet ADSL Cellular Routeur Firewall
Setup Guide 9023409-01
Page 61
15.2
Set-up
To set the advanced address translation functions,
•
select the setup >Network>Advanced NAT menu.
To create a new DNAT rule,
•
click “Add a DNAT” rule.
•
Select “Yes” to enable the rule.
•
Enter the characteristics of the IP frames which must be modified by the DNAT rule.
Source IP address & Destination IP address.
Protocol (TCP, UDP, …)
Source port & Destination port
•
Enter the new destination port number and IP address.
To create a new SNAT rule,
•
click “Add a SNAT” rule.
•
Select “Yes” to enable the rule.
•
Enter the characteristics of the IP frames which must be modified by the SNAT rule :
Source & Destination IP address and transport protocol (TCP, UDP)
Source & Destination port
•
Enter the new source IP address.
