eTIGER ES-DLS-01, Manual

Set Master Code

Programming Step

Keystroke Combination

1. Enter Program Mode
2. Update Master Code

3. Exit

Please do remember your Master Code because the Master Code can’t be reset if forget it.

* (Master Code) # 
0

（

New Master Code

）

#

（

Repeat New Master Code

）

# 

Master code is any 6 digits
*

Add Users PIN(s)

Programming Step

Keystroke Combination

1. Enter Program Mode
2. Add PIN

3. Exit

User ID: 0~499
PIN length: 4~8 digits

* (Master Code) # 
1 (User ID) # (PIN) # (Repeat PIN) #
The users can be added continuously
*

Add Users Card(s)

Programming Step

Keystroke Combination

1. Enter Program Mode:
2. Add Card: 
     Using Auto ID(Allows to assign Card 
     tonext available User ID number)
                      OR
2. Add Card: 
     Select Specific ID(Allows Master to 
     define a Specific User ID to associate 
     the card)
3. Exit:

User ID: 0~499
Card type: 13.56MHz M1 Card

* (Master Code) # 
1 (Read Card) # 
The cards can be added continuously.

1(User ID) # (Read Card) #

*

Change PIN

Programming Step

Keystroke Combination

1.Change PIN: 
    By Card(There will be auto allocate 
    PIN (8888) to cards when adding)
                      OR
    Change PIN: By User ID

2. Exit:

Note: Below is done outside programming mode, users can undertake this themselves

*  (Read Card) (Old PIN) # (New PIN) #
(Repeat New PIN) #

*  (User ID) # (Old PIN) # (New PIN) #
(Repeat New PIN) # 
Exit automatically