452515
Pumping the water out (Draining)
Use it when the washing program was interrupted or if pump stop
function was engaged, and you only wish to pump the water out of
the drum, without spinning.
Spinning
Aggressive spinning for non-delicate laundry at high spin RMP.
Spinning rpm can be decreased by pressing the (
) key - selection
of spinning speed (rpm).
-
Adding washing and softening agents
(see Tips for washing and energy saving)
• pre-wash compartment
• main wash compartment
• softener compartment
If you do not apply the program which includes the pre-wash
feature, you may add washing detergent directly into the drum,
using the measuring vessel.
When adding softener, be careful to
fi
ll the dispenser
only up to the marked level.
Be sure to close the detergent dispenser when
opening/closing the appliance door.
• Push the START button (E). The machine starts operating after
a few seconds. LED indicating the current washing stage lights
up. If the door is not closed after the machine is switched on,
the START LED starts
fl
ashing again after a few seconds.
When you close the door, the machine initiates the selected
program.
• As each washing stage is completed the relevant washing stage
indicator LED goes off and the subsequent one goes on.
• In case you would like to alter the washing program after the
initiated washing operation, turn the program selector for one
second to the position “0”, followed by the selection of a new
program. Switching the machine off deletes any previously
selected additional functions(i.e. Pump stop), so they have to be
reactivated.
Upon switching OFF, all additional pre-selected
functions are deleted; therefore they must be switched-
ON again.
Start the operation
12
Summary of Contents for EWM246KWIT
Page 1: ...Instructions for Use Washing machine...
Page 30: ...452515 30...
Page 31: ......
Page 32: ...PS PG0A ETN en 11 13...
