- 19 -
output, until the back light becomes green,
the channel is in the state of stable voltage
output (CV light). Check whether the
output voltage can be adjusted from 0V to
maximum rating.
(3) current output check
a.
turn on the power button;
b.
Set the power supply output voltage is
about 8V ;
c.
Use the output clamp wire to short circuit
the front panel output terminals;
d.
Press the "ON/OFF" key to open the output,
until the back light becomes green, and the
channel is in the state of constant current
output steady state output (CC light). Check
whether the current can be adjusted from
0A to maximum rating.
