This vehicle is equipped with dual front
mechanical drum brakes and a rear hydraulic
disc brake.
The front brakes are controlled by the long
brake lever on the right-handle bar.
The rear brake is controlled by the long
lever on the left-handle bar.
Front and Rear Brakes
The rear brake is the primary stopping
brake on your vehicle. Using the rear brake
to stop your vehicle will prevent steering
control loss.
Use your front and rear brakes in combination
to control your speed while descending
a grade. Use caution not to apply too
much pressure to your front brakes so
that the wheels lock up, stop turning, and
causing a loss of steering control. If the
front wheels lock up, and stop turning,
lightly reduce the pressure on the front
brake lever until they unlock and start to
turn.
Parking Brake
The front brake lever has a button located
at the pivot point to lock the brake in the,
"
O
", on position.
This should be engaged as a parking brake
whenever the vehicle is not in operation.
This feature must be engaged in order to
start the engine. The brake lever has a
safety switch built in to prevent the engine
from starting while the brake is disengaged.
Page 8
CONTROL FEATURES
CONTROL FEATURES
Rear Disk
Brake Lever
Summary of Contents for EXL-50 - SERVICE
